Aluminium:
Standard sizes: 1.5mm or 2mm
Thicker carrier: plates, up to 12mm
Electronic Enclosure Specialists
Custom Die-cast Enclosures
A range of die-cast enclosures, with and without mounting flanges and IP ratings
- Custom Options include:
- Extrusion - Length, colour, cut-outs, artwork
- End Plates - size, thickness, colour, cut-outs, fixings and artwork
- Carrier Plates - size, cut-outs, fixings and artwork
These can be purchased as off the shelf standard products in our online shop.
Custom Options
Enclosure
- Die-cast aluminium
- Surface finish: Natural or Powder Coated
- Milled cut-outs or recesses
- Laser marked or digital print
Carrier Plates
- Manufactured to specified dimensions
- Various surface finishes & colour options
- Punched cut-outs
- Laser marked or digital print
CNC Milling:
Holes for connectors or light pipes and large cut-out for LCD screens can be milled into the extrusion as well as a recess for labels or a membrane.
Please note we will require the following information:
- Full list of the components being used
- Dimensioned drawing. Preferred formats are STEP, IGES, DXF or SolidWorks files but we will work from a hand drawn sketch
Surface Finish:
Anodised Colour Options: Clear (SIlver), Black, Blue, Red, Green. Please call to discuss other options.
Anti-corrosion coatings: Surtec 650 or Iridite NCP - Natural enclosures only
Powder Coating: Fine texture; Black, Red and Grey. Please call to discuss other options. For other colours a RAL number is required
Artwork:
Artwork can be applied to the enclosure in one of 2 methods:
- Full-colour Digital Print
- Laser Marking
Please note we will require the following information:
- For best results, we will need you to provide us with logos and icons in a vector format.
- A list of all fonts used.
Thickness Options:
Cut-outs:
Cut-outs can be added for mounting the PCB and other components within the extrusion. Cut-outs can be added to give clearance to other components.
Please note: We will require a full list of the components being used. A dimensioned drawing. Preferred formats are STEP, IGES, DXF or SolidWorks files but we will work from a hand drawn sketch
Clinch Fasteners:
A range of bushes, nuts and stand-offs can be added either as a means to mount your PCB or additional components or a grounding point.
Please note we will require the following:
- A full list of the fastenings being used.
- Dimensioned drawing. Preferred formats are STEP, IGES, DXF or SolidWorks files but we will work from a hand drawn sketch
Surface Finish:
Anodised Colour Options: Clear (SIlver), Black, Blue, Red, Green. Please call to discuss other options.
Anti-corrosion coatings: Surtec 650 or Iridite NCP
Artwork:
Artwork can be applied to the carrier plate in one of 2 methods.
- Full-Colour Digital Print
- Laser Marking
Please note we will require the following:
- For best results, we will need you to provide us with logos and images in a vector format.
- A list of all fonts used.
