E-Case Range of Enclosures

7 Jan 2025

By Alan Low

The E-Case range of closed box extrusions comes in five sizes to accommodate PCBs or carrier plates that are 55mm, 100mm, or 160mm wide. These extrusions are available for purchase through our online shop in pre-anodized silver or black finishes, featuring raw edges, and are offered in fixed lengths. Each package includes end plates and screws.

The extrusion design incorporates two grooves along each side, allowing for the installation of various mounting options, including surface, VESA, and DIN rail configurations.

E-Case A

Fits a 55mm wide PCB or carrier plate
Cut lengths: 40mm, 80mm or 120mm
Material: Aluminium 6063 T6
Cut tolerance: -0mm / +0.5mm
Max height of components is 18.6mm
Weight: 1.0kg/m

E-Case B

Fits a 100mm wide PCB or carrier plate
Cut lengths: 80mm, 160mm or 220mm
Material: Aluminium 6063 T5
Cut tolerance: -0mm / +0.5mm
Max height of components is 18.6mm
Weight: 1.38kg/m

E-Case C

Fits a 100mm wide PCB or carrier plate
Cut lengths: 80mm, 160mm or 220mm
Material: Aluminium 6063 T5
Cut tolerance: -0mm / +0.5mm
Max height of components is 33.6mm
Weight: 1.63kg/m

E-Case D

Fits a 160mm wide PCB or carrier plate
Cut lengths: 80mm, 160mm or 220mm
Material: Aluminium 6063 T5
Cut tolerance: -0mm / +0.5mm
Max height of components is 40.75mm
Weight: 3.4kg/m

E-Case F

Fits a 160mm wide PCB or carrier plate
Cut lengths: 80mm, 160mm or 220mm
Material: Aluminium 6063 T5
Cut tolerance: -0mm / +0.5mm
Max height of components is 18.3mm
Weight: 2.2kg/m

Accessories

A full range of accessories are available for the E-Case Range including End Plates, Screws, Bezels, Rubber Gaskets, Carrier Plates, Surface, VESA, and DIN Rail mount options