Holes for connectors or light pipes and large cut-out for LCD screens can be milled into the extrusion as well as a recess for labels or a membrane.
Please note we will require the following information:
Full list of the components being used
Dimensioned drawing. Preferred formats are STEP, IGES, DXF or SolidWorks files but we will work from a hand drawn sketch
Artwork:
Artwork can be applied to the enclosure in one of 2 methods:
Full-colour Digital Print
Laser Marking
Please note we will require the following information:
For best results, we will need you to provide us with logos and icons in a vector format.
A list of all fonts used.
Thickness Options:
Aluminium:
Standard sizes:1.5mm or 2mm
Thicker carrier:plates, up to 12mm
Cut-outs:
Cut-outs can be added for mounting the PCB and other components within the extrusion. Cut-outs can be added to give clearance to other components.
Please note: We will require a full list of the components being used. A dimensioned drawing. Preferred formats are STEP, IGES, DXF or SolidWorks files but we will work from a hand drawn sketch
Clinch Fasteners:
A range of bushes, nuts and stand-offs can be added either as a means to mount your PCB or additional components or a grounding point.
Please note we will require the following:
A full list of the fastenings being used.
Dimensional drawing. Preferred formats are STEP, IGES, DXF file but we can work from a hand-drawn sketch.
Surface Finish:
Anodised Colour Options: Clear (SIlver), Black, Blue, Red, Green. Please call to discuss other options.
Anti-corrosion coatings: Surtec 650 or Iridite NCP
Artwork:
Artwork can be applied to the carrier plate in one of 2 methods.
Full-Colour Digital Print
Laser Marking
Please note we will require the following:
For best results, we will need you to provide us with logos and images in a vector format.
A list of all fonts used.
STEP and DXF Files are available upon request
If you have a project or need help with a design - please get in touch