Combi Case 2 part U section extruded aluminium enclosure kit
Combi-Case_15_29_80mm_silver_pic_1

Combi Case

Is a 2 piece U secetion extrutrusion that can be used to manufacture enclosures in 3 different height variations. The combi case has been designed to fit a 100mm wide PCB and is available in kit form from the shop in set lengths in both silver and black.

Click here to go to shop options

Alternatively we can offer a full customisation service - see below

Combi-Case_15_29_80mm_black_pic_1_1

Customisation Options

Extrusion

  • Can be cut to length: 40mm to 1500mm
  • Cut tolerance: -0mm / +0.5mm
  • Surface finish: Anodised, Anti-corrosion or Powder Coated
  • Milled cut-outs or recesses
  • Laser marked or digital print

End Plates

  • From 1.5mm up to 10mm thickness
  • Over sized
  • 19″ rack mount
  • Aluminium, Zintec or Acrylic
  • Various surface finishes and colour options
  • Milled or punched cut-outs
  • Laser marking or digital print

Carrier Plates

  • Manufactured to specified dimensions
  • Various surface finishes & colour options
  • Punched cut-outs
  • Laser marked or digital print
Combi-Case_-_Length_1

For a more detailed breakdown of all the customisation options offered by Lincoln Binns, including:

  • Extrution length
  • Cut-outs via milling
  • Colour options - anodised
  • Artwork
  • Endplates
  • Carrier plates

go to the customision section of the website

Combi-Case_-_Milling_1